User Guide – PERC2000 System Controller
Publication 81-9059-0605-0, Rev. B
November 2010
Proprietary Information of
PESA 1-1
Chapter 1 About This Manual
1.1 D
OCUMENTATION AND
S
AFETY
O
VERVIEW
This manual provides instructions for installation and operation of the PERC2000 System
Controller hardware and software application for the Windows
®
operating system, designed and
produced by PESA.
It is the responsibility of all personnel involved in the installation, operation, and maintenance of
the equipment to know all the applicable safety regulations for the areas they will be working in.
Under no circumstances should any person perform any procedure or sequence in this manual
if the procedural sequence will directly conflict with local Safe Practices. Local Safe Practices
shall remain as the sole determining factor for performing any procedure or sequence outlined
in this document.
1.2 C
AUTIONS
,
AND
N
OTES
Throughout this document, you should notice various Cautions and Notes. These addendum
statements supply necessary information pertaining to the text or topic they address. It is
imperative that audiences read and understand the statements to avoid possible loss of life,
personal injury, and/or destruction/damage to the equipment. These additional statements may
also provide added information that could enhance the operating characteristics of the equipment
(i.e., Notes). Examples of the graphic symbol used to identify each type of statement and the
nature of the statement content are shown in the following paragraphs:
1.2.1 C
AUTION
Caution statements identify conditions or practices that can result in
personal injury and/or damage to equipment if the instructions contained in
the statement are not complied with.
1.2.2 N
OTE
Notes are for information purposes only. However, they may contain
invaluable information important to the correct installation, operation,
and/or maintenance of the equipment.
To Next Page