User Guide – PERC2000 System Controller
Publication 81-9059-0605-0, Rev. B
November 2010
Proprietary Information of
PESA PESA 8-53
Expanding the tree under the Salvo Include Lists parent header in the command tree window
opens a listing of named salvo include lists. If you wish to access the configuration screen for a
specific salvo include list, click on the name in the column listing. If you wish to access a
blank Salvo Include Lists configuration screen, click on the Salvo Include Lists parent header
in the command tree window.
8.9.15 S
OURCE
I
NCLUDE
L
ISTS
C
ONFIGURATION
S
CREEN
The Source Include Lists Configuration Screen, Figure 8-53, allows you to selectively build a
named list of sources which, when assigned to a specific remote control panel, designates the
sources that panel is authorized to control. Multiple panels may share a Source Include List.
Clicking on the Source Include Lists parent entry in the Command Screen Window brings up a
clean copy of the working screen. Note that the screen has three areas:
Figure 8-53 Source Include Lists Configuration Screen
Source List Name – This field is where you assign a name to the Source Include List. Names
can be any combination of letters and numbers up to eight characters. PESA highly
recommends that you choose a name which is somewhat descriptive of the function of the
source include list. Source List names may be from one to eight characters in length and are
constructed using uppercase letters, numbers, and spaces. The first character must be a letter.
Source List – Sources listed in this column are accessible by remote control panels functioning
under the named source include list.
Available Sources – This column contains a listing of all sources which may be included in the
source include list.
To Next Page