Input
79
Daily piece counter, operating hours counter and welding length
Different operating data is displayed on this screen.
The sealed parts are counted with the daily piece counter. The welded parts are counted
with the daily piece counter. The count takes place when the feed rollers are opened after
the welding process.
Piece counter
Total welding length
Operating hours counter (switch-on duration)
Production hours counter (sealing time)
All operating data can be reset with the respective "CLEAR" touch fields.
Maximum welding force
The maximum welding force can be limited by pressing the maximum welding force touch
field. This may be necessary for cutting wheels.
All parameter sets P1..P50 are then adjusted if necessary.
To Next Page
Loading...