2:15
F
B C
G H I J
A
ED
Preparations
Immediate tie-off (H)
Press immediate tie-off while sewing and your machine sews a few tie-off stitches and stops automatically.
By touching the tie-off button once more while the action indicator is lit, the function can be turned off.
The tie-off function can be programmed, see chapter 4.
Stitch restart (I)
When having stopped sewing in the middle of a stitch, press restart to start sewing at the beginning of the
stitch again without having to reset any special settings you have made.
If pressing the stitch restart button while sewing, the stitch will be À nished and the machine will then stop.
You can also use stitch restart to go back to the beginning of an embroidery.
Needle up/down (J)
Press this button to move the needle up or down. The set ting of the needle stop po si tion is changed at the
same time. When needle down is activated, the icon is lit, the needle will stop in the down position and the
presser foot will raise to pivot height.
You can also tap the foot control to raise or lower the needle.
To Next Page
Loading...
Need help?
General
