5:5
B
D
C
9
E
A
Sequencing
Horizontal preview (9)
To see your sequence horizontally, touch the
preview icon.
Your sequence will be shown on a pop-up. If it is
too long for the window, it is possible to zoom to all
(A) to see the entire sequence. You can also scroll
through the sequence with the arrows (B).
Directional stitches (17)
Add directional stitches between stitches in a
sequence. These stitches make it possible to move
stitches in various directions and you can create
new shapes and wider large-area borders.
Directional stitches are straight stitches with a
length of approximately 1mm and can be used in 16
different directions.
Open the directional stitches pop-up. The
selected angle will be indicated in green (C) in the
directional À eld. The angle will also be shown on
the pop-up (D). Touch the directional À eld to select
which angle you want to insert a stitch. You can
either touch the desired line on the white area or
touch and drag the green line and then release it at
the desired angle.
When the intended angle is selected, touch the
insert icon (E) and one stitch will be inserted in the
sequence at the cursor position.
The directional stitch can be deleted, duplicated or
mirrored without closing the directional stitches
pop-up.
To Next Page
Loading...
