6:8
A
Stitch Creator
Embroidery mode
In embroidery mode the stitch is saved as a design.
Touch the Save to Personal designs icon (A) and
select Personal designs, Personal À les or Devices.
See page 8:8 for more information.
Important Stitch Creator
information
To use Stitch Creator in either
sewing mode or embroidery mode
Stitch Creator can be used in either sewing mode
or embroidery mode. A stitch created when sewing
mode is active will not be available when opening
Stitch Creator after activating embroidery mode and
vice versa. The created stitch will not be transferred
to the other mode.
A stitch created when embroidery mode is active
will become an embroidery design when loaded to
Embroidery edit and cannot be sewn as a stitch in
sewing mode.
A stitch created in sewing mode can be loaded
manually into Embroidery edit, but will then
become an embroidery design.
Using created stitches in sequencing
A stitch created in Stitch Creator can be used as part
of a sequence. In sequencing, open selection menu
and locate your saved stitch. The stitch will be
inserted at the cursor position in the sequence.
Common Stitch Creator pop-ups
Not an editable stitch
Some stitches are not available to edit in Stitch
Creator. Buttonholes, Maxi Stitches and four
direction stitches cannot be opened in Stitch Creator.
Sequence out of range
Your programmed stitch can be up to
approximately 500mm (20”) long. If the sequence
exceeds the maximum length this pop-up will let
you know.
The stitch or stitch point you are trying to add will
make the sequence too long.
To Next Page
Loading...
