7:8
Embroidery Mode - Preparations
9. When the À rst color is completed, your machine
stops. A pop-up appears asking you to change
color. Re-thread with the next color and
continue embroidering by pressing start/stop.
Each color segment is tied off at the end and the
needle thread is cut.
10. When the embroidery is completed, your
machine cuts the needle and bobbin thread
and stops. The needle and presser foot raise
automatically for easy removal of the hoop.
A pop-up informs you that your embroidery is
À nished. Touch OK to clear your design from
the screen.
To Next Page
Loading...
