14: Configuration Overview
146
Setting Date and Time
To modify the date and time from Configuration:
1 Once in Configuration Mode, press the Smart Select knob.
2 Select
and press the Smart Select knob. The Configuration Date/Time screen appears.
See Figure 71.
3 Use the Smart Select knob to select the entry you want to change and press the Smart Select
knob.
4 Adjust the value (see “Adjusting Numeric Values” on page 35). Press press the Smart Select knob
to accept your change.
5 Select another value for modification or press the
soft key to save changes and
return to the main Configuration screen.
NOTE: To adjust the format of the date and time, you need to enter the Configuration Mode password. See
“Changing Settings” on page 147.
Figure 71 Configuring Date and Time
To Next Page
Loading...