Philips Efficia DFM100 - Printing Settings; Restoring Default Settings

14: Configuration Overview
148
Printing Settings
 To print the configuration settings:
1 In Configuration Mode, press the Smart Select knob.
2 Using the Smart Select knob, select
.
3 Press the Smart Select knob to print the report. See Figure 72.
NOTE: To stop printing, press the Print button.
Restoring Default Settings
 To return all configuration settings to those originally set during manufacturing:
1 Press the
 soft key.
2 Enter the Configuration Password.
3 Press the
 soft key.
4 Once you are prompted to save changes, select
 and press the Smart Select knob.
Figure 72 Sample Configuration Report
Following the General Settings listing, the Configuration Report continues to list the configured
device settings in the order they are listed in Configuration Mode. See “Configurable Parameters”
on page 149.
NOTE: Configuration setting information appearing in parenthesis with “xx” in
Figure 72 are replaced by the current setting when an actual Configuration
Report is printed. For example - Time Format: (xx) is replaced with the currently
configured time format.

  
  
  
 


  
 
 