179
17
Troubleshooting
Overview
If the Efficia DFM100 detects an error or potential problem during use, it displays a textual message
to guide you. These messages are often accompanied by a voice prompt or audible beeping tone.
This chapter describes these statements that you see, along with other symptoms, and provides
suggestions for what to do and resources for you to contact for further information.
Resolving Issues
If you are unable to resolve a problem using the suggestions in this chapter, run an Operational
Check to determine if there is a malfunction requiring service. If a malfunction is identified, call for
service and:
• If the malfunction is related to ECG monitoring, defibrillation or pacing, take the Efficia
DFM100 out of service.
• If the malfunction is related to SpO
2
, EtCO
2
or NBP, take the device out of service if the
function is essential to patient care in your institution.
Responding to Test Results
Results of Automated Tests associated with critical functionality are reported through the Ready For
Use Indicator and the Automated Test Summary report (see “Automated Tests” on page 172).
To respond to errors reported through Operational Check, see “Operational Check Tests and
Results” on page 163).
For further technical and repair information, refer to the Efficia DFM100 Service Manual.
WARNING: Product servicing and repair should only be performed by qualified service personnel.
To Next Page
Loading...