Philips Efficia DFM100 - Setting Alarms; Changing Alarm Limits; Enabling;Disabling Alarms

Heart Rate and Arrhythmia Alarms 4: ECG Monitoring
61
Setting Alarms
Alarm settings for Heart Rate (HR), VTach and PVC Rate Limit for the current patient event can be
changed via the Smart Select knob during the event. Settings for other HR and arrhythmia alarms
may not be changed.
Changing Alarm Limits
 To change HR, VTach or PVC Rate Limits:
1 Press the Smart Select knob.
2 Turn the Smart Select knob to highlight
 and press the Smart Select knob.
3 Select
 and press the Smart Select knob.
4 Select the limit you want to adjust and press the Smart Select knob.
5 Select the new value and press the Smart Select knob.
Enabling/Disabling Alarms
 To enable/disable the HR and Arrhythmia alarms:
1 Press the Smart Select knob.
2 Turn the Smart Select knob to highlight
 and press the Smart Select knob.
3 Select
 and press the Smart Select knob.
4 Select
 () and press the Smart Select knob.
Figure 46 Cardiotach Mode Arrhythmia Alarm Priority Chain






For AED Mode Only