Philips Efficia DFM100 - Service Mode Tests

Overview 14: Configuration
147
Changing Settings
 To change default settings in Configuration Mode:
1 Press the
 soft key.
2 Enter the configuration password:
a Using the Smart Select knob, select the first number and press the Smart Select knob.
b Use the Smart Select knob to enter the remaining numbers in the password.
c When finished, select
 and press the Smart Select knob.
3 Press the Smart Select knob and then use it to select the parameter to be changed. Then press
the Smart Select knob.
4 Select the sub-menu you want to change, then press the Smart Select knob.
5 Select the new default option. Press the Smart Select knob to select the highlighted choice.
6 Use the
 soft key to advance to the next parameter and repeat steps 4-6 to make
additional changes.
7 Once the desired changes have been made, press the
 soft key to return to the
Configuration Main screen. Press the
 soft key to save the new configuration.
•Pressing the
 soft key returns you to the previous settings.
•Pressing the
 soft key resets all settings to factory defaults.
8 Press the
 soft key to return to normal operating mode. If you press 
before saving changes, you are asked if you want to exit without saving the changes.
• If you want to save the changes, select
, press the Smart Select knob, press the 

soft key and then exit Configuration Mode.
• If you do not want to save the configuration, select
 and press the Smart Select knob to
exit Configuration Mode.
Exporting Settings
 To export configuration settings to a USB drive:
1 Confirm you have a USB drive inserted into the USB port and you are in Configuration Mode.
2 Press the
 soft key.
3 The Efficia DFM100 copies your current configuration to the USB drive.
NOTE: If you already have a configuration stored on the USB drive, exporting another to the USB drive
overwrites the one already on the drive.
Importing Settings
 To import configuration settings from a USB drive:
1 Once in Configuration Mode, insert the USB drive with the saved settings into the USB port.
2 Press the
 soft key and enter the Configuration password.
3 Press the
 soft key. The Efficia DFM100 copies the current configuration from the USB
drive.
4 Make any device-specific configuration changes.
5 Press the
 soft key.