Basic Orientation 2: Device Basics
11
Connecting the SpO
2
Cable
To connect the SpO
2
cable:
1 Hold the cable connector with the flat side and blue marking facing the front of the Efficia
DFM100 (see Figure 9).
2 Insert the cable into the blue SpO
2
port and push the blue portion of the connector into the
device until it is no longer visible.
Connecting the NBP Cable
To connect the NBP cable:
1 Insert the NBP cable into the red NBP port (see Figure 10) and push completely in.
2 Attach the NBP cable to the NBP cuff.
Figure 9 Connecting the SpO
2
Cable
Figure 10 Connecting the NBP Cable
To Next Page
Loading...