Operating and Navigating 2Basic Operation
17
Operating and Navigating
The principle method of operating your monitor is via the touchscreen. Almost every element on the
screen is interactive. Screen elements include measurement numerics, information fields, alarms fields,
waveforms and menus.
There are also four keys to the right of the screen (see also “X2 Controls and Indicators” on page 12).
These let you:
Key with symbol
(international)
Text replaces
symbol (English
versions only)
•Silence alarms: the Silence key acknowledges all active
alarms by switching off audible alarm indicators and lamps.
•Switch alarms on or off, or pause alarms.
•Call up SmartKeys on the screen (see below).
•Close all open menus/windows and return to the main
screen.
• If you are already in the main screen (no additional menus/
windows are open), then pressing this key opens the
Change Screen window, where you can choose from a
number of pre-configured screens.
•To temporarily disable the touchscreen operation, press and
hold this key for 2 seconds. Press the key again to re-enable
the touchscreen operation.
To Purchase, Visit Avobus.com or call 1-800-674-3655
To Next Page
Loading...
Need help?
General
