Physio Control lucas 2 - Service Administration and Procedures; Service Reporting and Device Tracking; Recycling Information; Responsibility for Information

LUCAS® 2 Chest Compression System – Service Manual
3323809-001, © 2017 Physio-Control, Inc.
3
REPORTING
All performed service shall be reported to Physio-Control, Inc. on a monthly basis.
The information shall comprise:
• Serial number of device serviced
• Detailed description of symptoms and problem description
• Actions taken
• Replaced parts, with serial number or batch number when applicable
• Person performing service actions (service technician)
DEVICE TRACKING
All performed service where modules are replaced, the serial no./batch no. of each module shall be stated
in the service report. This information is then sent to Physio-Control, Inc, on a monthly basis.
The modules that have traceability are:
• Compression Module
• Electronic PCBs
• Electric Motor
• Battery
• Back Plate
• Main Body
• Support Leg
• Hood
RECYCLING INFORMATION
Important!
The battery used in LUCAS shall be returned to the local recycling station or dealer/distributor for correct
recycling.
LUCAS contains of several materials as listed below:
• Polyamide reinforced with 30% glass fiber
• Polycarbonate/Polybutylene Terephthalate
• Polycarbonate
• Polyurethane
• PVC
• POM
• Silicone
• Chloroprene
• Aluminum
• Stainless steel
• Brass
For further recycling information please contact Jolife AB, Sweden or Physio-Control, Inc.
R ESPONSIBILITY FOR INFORMATION
The Technical Manager at Jolife AB and Physio-Control, Inc. are responsible for the information in this
Service Manual.