LUCAS® 2 Chest Compression System – Service Manual
3323809-001, © 2017 Physio-Control, Inc.
36
7. Tools list
IN THIS SECTION IT IS LISTED THE RECOMMENDED TOOLS FOR PERFORMING SERVICE AND
M
AINTENANCE
OF LUCAS 2
7.1. Standard tools
Torx Driver T10, T20, T25 (or set of Torx Keys)
Philips Driver PH1
Small Flat Screw Driver
Flat Screw Driver 5.5x0.8 mm
Micrometer Adjustable Torque Screwdriver with minimum range of 1.0-4.0 Nm
Bits Philips 1 (PH1)
Bits Flat 5.5x0.8 mm (5.5)
Bits Torx 10 (T10)
Bits Torx 20 (T20)
Bits Torx 25 (T25)
Hammer
Mandrel Cutting
Pliers Adjustable
Pliers ESD
Protection kit
Break -Over torque wrench, 17mm open head, torque setting of 1.0 Nm
REDEL extracting tool
To Next Page
Loading...
