first upgrade or downgrade to version 00.06.07.7. The firmware file (.bin
file) can be found in the ZIP archive together with the software package,
which you can download on the CONNECT-CONTROL device product
page in the download area.
Once your device has the correct firmware version, you can next install
the software package. To do this, navigate to the menu item “System” →
“Package Manager” and click on the “Upload” tab. There you can now
upload the software package (.ipk file) from the ZIP archive. Then
confirm the warning that this is not a software package certified by
Teltonika.
When the installation process is complete, you can now switch to the
web interface for the CONNECT devices via the menu item “Services” →
“CONNECT”. The commissioning page of the device should now be
displayed here.
Page 11 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...
Need help?
General