determine whether the device should provide its own network as an
access point or connect to an existing network as a client. You can then
fill in the SSID, security level, password and channel fields accordingly. If
you are not sure about the settings of your existing WiFi network, you
can use the “Start Search” button to display all networks within range.
Clicking on the search entry then fills in all fields except for the password.
A notice:
If you have set router as the operating mode, you can no longer select
the interface that you selected for the WAN for the LAN.
Page 23 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...