If the file has been uploaded and recognized as valid firmware or
software, the following message will appear next:
The update takes approx. 1-3 minutes. Then you should, ifIf your
computer, tablet or phone does not do this automatically, reconnect to
the device's Wi-Fi network. Of course, this only applies if the web server
accesses the device via WLAN. This step is not necessary for a software
update on CONNECT-CONTROL devices. Once the process is
complete, you should be automatically redirected to the device's home
page. If the forwarding does not work after a firmware update, you also
have the option of clicking on the link in the text.
Page 71 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...