User Manual
E727T0005, valid for E-727
BRO, 2019-06-28
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 64 / 240
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws
Starting AutoZero in PIMikroMove
In the Start up axes step of the Start up controller window, execute the AutoZero
procedure.
− To re-open the Start up controller window with the Start up axes step, select
the E-727 > Start up axes... menu item in the main window.
Proceed as follows for the linear axes that are connected:
a) Mark the linear axes in the list.
b) Click Auto Zero. The Auto Zero dialog opens.
c) In the Auto Zero dialog, start the AutoZero procedure by clicking Start.
d) After a successful AutoZero procedure, click OK.
To Next Page
Loading...
Need help?
General
