User Manual
E727T0005, valid for E-727
BRO, 2019-06-28
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 19 / 240
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws
Scope of Delivery
Item number Description
Digital piezo controller according to the order
000023194 Separate 24 V wide-range-input power supply (120 W/5 A) for use with line
voltages from 100 to 240 VAC and voltage frequencies of 50 or 60 Hz, with barrel
connector
3763 Power cord
Adapter for the power supply connection; barrel connector to M8 4-pin connector
C-815.34 RS-232 null-modem cable, 3 m, 9/9-pin
Not for E-727.xxxF and .xxxAF models.
C-815.563 Cross-over network cable for direct connection with the PC via TCP/IP
000011448 USB cable (type A to type B) for connection to the PC
E-727.CD Product CD with software and user manuals for the E-727
User Manual for the E-727, this document
Models with additional analog interfaces only (E-727.xxxA, E-727.xxxAx):
E-727.IO3x Analog input cable, D-Sub 15 (m) to open end, 1 m. For further details, see p. 230.
Accessories
P-895.4LDS Adapter cable for four channels, Sub-D 37 (m) to 8 x Lemo (4 x piezo, 4 x sensor);
0.3 m. For piezo stages with piezoresistive or strain gauge sensors.
PI has to adapt the cable to the piezo stage with which the cable is to be used.
Therefore the cable and the piezo stage have to be ordered together.
E-727.IO8
Adapter cable for the Analog I/O socket of E-727.xxxA and .xxxAx models, D-Sub
15 (m) to 8 x BNC, 0.4 m. For further details, see p. 231.
E-710.SCN Dynamic Digital Linearization (DDL) option. The DDL makes it possible to achieve
significantly better position accuracy for dynamic applications with periodic
motion. It is used in conjunction with the wave generator output and in addition
to the "normal" servo algorithm in closed-loop operation. You can activate the
DDL after purchase and without opening the device. See "Dynamic Digital
Linearization (DDL)" (p. 114) for more information.
E-712.U1 Advanced Piezo Control option. Advanced Piezo Control (APC) is an alternative
control algorithm for closed-loop operation of piezo actuator systems. You can
activate the license after purchase and without opening the device. See the
separate E712T0007 Technical Note for more information.
To order, contact our customer service department (p. 234).
To Next Page
Loading...
Need help?
General
