PI E-727 User Manual

User Manual
E727T0005, valid for E-727
BRO, 2019-06-28
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 9 / 240
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws
Other Applicable Documents
Additional documentation for the E-727:
Description Document
PI General Command Set (GCS) PZ281E GCS Commands Manual for E-727
Documentation for the available PC software:
Description Document
GCS Data
SM146E Software Manual
E-727 GCS Driver Set for use with NI LabVIEW
software
PZ260E Software Manual
Analog Controller GCS Driver Set for use with NI
LabVIEW software
PZ181E Software Manual
Merge Tool for use with driver sets for NI LabVIEW
software
SM154E Software Manual
PI GCS 2 DLL SM151E Software Manual
PI MATLAB Driver GCS 2.0
SM155E Software Manual
PIMikroMove SM148E Software Manual
Updating PI Software A000T0032 Technical Note
PI Update Finder
A000T0028 Technical Note
Basic information on EtherCAT networks and the CiA402 drive profile:
Description
Document
Adjustable speed electrical power drive systems -
Part 7-201: Generic interface and use of profiles for
power drive systems - Profile type 1 specification
IEC 61800-7-201:2015
Adjustable speed electrical power drive systems -
Part 7-301: Generic interface and use of profiles for
power drive systems - Mapping of profile type 1 to
network technologies
IEC 61800-7-301:2015
EtherCAT Implementation Directive for CiA402 Drive
Profile: Directive for using IEC 61800-7-201 within
EtherCAT-based servo drives
ETG.6010 D (R) V1.1.0
Documentation of EtherCAT samples on the E-727 CD:
Description Document
Implementing a PI Controller in TwinCAT 3.1 for a
Single-Axis Motion
A000T0071 Technical Note

PI E-727 Specifications

General

Brand	PI
Model	E-727
Category	Controller
Language	English