Pima Hunter-Pro 832 - Page 43

HUNTER-PRO Series Installation Guide 43
4.1.2 Local Programming with COMAX
COMAX gives a quick and easy way to upload sets of parameters in the service station
and download them later on at a customer site. Connecting the PC with the COMAX to
the control panel is done using LCL-11A adaptor.
Figure 41. Connecting Keypad to Control Panel and PC with COMAX
4.1.3 Remote Programming with COMAX
The HUNTER-PRO series can be programmed and controlled remotely from any PC,
using PIMA’s COMAX software (with PIMA PSTN modem). Please refer to the COMAX
user guide for detailed information.
4.1.4 Programming with a Keypad
The HUNTER-PRO series has two basic menus: User menu, made of single-press key
commands (the commands are printed above the keypad’s keys), and Installer menu.
SRK12123HTBL
+---_++++---
Example for a zone status
bar
This is a parameters set display.
(+): The parameter is enabled.
(-): The parameter is disabled.
_ : The current programmed parameter
When the flashing sign _ reaches a letter, the display changes for 3 seconds and
shows a brief description of the function.
For example:
Parameters screen
SSAL
----
Parameter’s description automatically appears for
few seconds when curser moved upon parameter
Activate Siren
----