SPECIAL LUBRICATION INSTRUCTIONS
1. BEARINGS AND BUSHINGS - CLEAN EXTERIOR WITH A DRY TYPE SOLVENT
BEFORE LUBRICATING .
2. LUBRICATION POINTS - WIPE ALL LUBRICATION POINTS CLEAN OF OIL
GREASE, OIL, DIRT, ETC., BEFORE LUBRICATING.
NOTES
1. SEE THE LATEST REVISION OF LYCOMING SERVICE INSTRUCTIONS NO. 1014
FOR USE OF DETERGENT OIL WITH LYCOMING ENGINE.
CAUTIONS
1. DO NOT USE HYDRAULIC FLUID WITH A CASTOR OIL OR ESTER BASE.
2. DO NOT OVER LUBRICATE COCKPIT CONTROLS.
3. DO NOT APPLY LUBRICANT TO RUBBER PARTS.
4. DO NOT LUBRICATE CABLES: THIS CAUSES SLIPPAGE.
Issued: 12/15/76
1C13
*CHEROKEE ARROW III SERVICE MANUAL
HANDLING AND SERVICING
To Next Page
Loading...
Need help?
General