Piper ARROW III Service Manual

COMPONENT LUBRICANT FREQUENCY
1. ENGINE SUMP (LYCOMING) MIL-L-6082 100 HRS
PA-28 4-201 ONLY LUBRICATING OIL,
AIRCRAFT RECIPROCATING
ENGINE (PISTON) GRADE AS
SPECIFIED, SAE 50 ABOVE
60
0
F AIR TEMP., SAE 40 30
0
TO 90
0
F AIR TEMP., SAE 30 ?0
0
TO 70
0
F AIR TEMP., SAE 20
BELOW 10
0
F AIR TEMP.
2. CARTRIDGE TYPE OIL FILTERS 50 HRS
3. AIR FILTERS CLEAN AS OFTEN AS
NECESSARY, EVERYDAY
UNDER SEVERE
CONDITIONS
4. PROPELLER ASSEMBLY MIL-G-23827 100 HRS
5. ENGINE CONTROL AND ENVIRONMENTAL
CONTROL PIVOT POINTS MIL-L-7870 100 HRS
6. FRESH AIR VENT SHAFTS MIL-G-7711 500 HRS
7. ALTERNATOR AND COMPRESSOR IDLER PULLEY BEARINGS MIL-G-81322 100 HRS
Figure 2-20. Lubrication Chart (Lycoming Power Plant, Propeller and Control Pivot Points)
Revised 12/11/78
1C21
*CHEROKEE ARROW III SERVICE MANUAL
HANDLING AND SERVICING

Piper ARROW III Specifications

General

Manufacturer	Piper Aircraft
Model	ARROW III
Engine	Lycoming IO-360-C1C6
Horsepower	200 hp
Maximum Takeoff Weight	2, 750 lb (1, 247 kg)
Seating Capacity	4
Propeller	2-blade, constant speed
Length	24 ft 7 in (7.49 m)