10. Enter the text on any or all the lines, with a maximum of 20 characters per line.
11. When finished, tap Apply. The screen displays the message as it will appear on your envelope or
tape.
12. Tap Apply again. The custom text message is now available when you print postage.
13. Tap the back arrow on the toolbar to return to the Home screen.
Adding a custom text message to your envelope or
tape
Your SendPro C Lite, SendPro C, SendPro+ device allows you to add a custom text message to your
mail. This can be a return address, for example. Your message can be up to five lines, with 20 characters
per line. The message prints on the left side of the print.
Printing on envelopes
Pitney Bowes Operator Guide February 2021 136
To Next Page
Loading...
