4. Tap Class.
5. Tap Start Over to show a list of all the available classes.
6. Tap First-Class Retail Metered for a First-Class mail envelope.
7. Tap Large Envelope.
8. Select any special services required.
9. Tap Apply.
10. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes.
If the envelope is too thick to go through the feeder, print the postage on a tape and apply the tape
to the large envelope or flat.
Sending Certified Mail
Certified Mail is a USPS service that provides you with proof of mailing by sending you a receipt once
your mailpiece arrives at its destination.
Not all extra services like Certified Mail are available for all classes and you can only combine certain
services.
To find out more about Certified Mail, open Postal Advisor:
l Tap Postal Advisor in the application drawer at the bottom of the Home screen, or,
l Tap SendPro Apps on the Home screen, then tap USPS Postal Advisor.
To send Certified Mail:
1. Tap Envelope Printing or Print on Envelopes on the Home screen.
2. If you have the accounting feature enabled, tap Account and select an account. If your device's
model number is 8H00 or 9H00 and if you have only a single account, once you select that account
the device will remember that account the next time you start Envelope Printing or Print on
Envelopes.
3. Tap Class.
4. Tap Start Over to show a list of the available classes.
5. Tap a class that you can combine with Certified Mail (for example, First Class or Priority Mail).
6. Tap the mailpiece type (for example, letter or large envelope).
7. Select Certified and tap Apply.
Quick start guide
Pitney Bowes Operator Guide February 2021 29
To Next Page
Loading...
