Clearing or resetting the number of mailpieces sent
Reset the piece counter to delete the piece count information.
Make certain that you wish to delete the piece count information. Once you do so, you cannot restore the
deleted data.
1. Tap Envelope Printing or Print on Envelopes on the Home screen.
2. Tap Pieces.
3. Tap Reset Counter to 0.
Performing USPSpostal inspections for Envelope
Printing or Print on Envelopes
Perform a balance inquiry or postage refill when the message Inspection Due appears.
When a postal inspection is required, you are notified automatically by the message on the Envelope
Printing or Print on Envelopes home screen: "Inspection Due. Perform a balance inquiry or a refill".
1. If accounting is enabled, you must first tap Account and select an account.
2. Tap Balance Inquiry or Refill Postage to complete the inspection.
Updating postal rates or software for printing on
envelopes
Automatic updates
Your device updates postal rates and software automatically.
Keep your device turned on and connected to your network to get your automatic updates, as the device
downloads updates during the evening hours.
Manual postal rate updates
Managing Printing on Envelopes
Pitney Bowes Operator Guide February 2021 146
To Next Page
Loading...
