Polaris RZR Pro R 2022

3.78
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
9. Install the NEW crankshaft bearing bolts in sequence
finger tight. Torque the crankshaft bearing bolts in
sequence to specification.
TORQUE
Crankcase Fasteners, Inner:
a. Torque all fasteners to 14 ft-lbs (20 N·m) in
sequence specified.
b. Torque all fasteners to 26 ft-lbs (35 N·m) in
sequence specified.
c. Angle torque all fasteners in sequence an
additional 45°
d. Angle torque all fasteners in sequence an
additional 45°
e. Angle torque all fasteners in sequence an
additional 90°
10.Torque the lower crankcase perimeter bolts in
sequence to specification.
TORQUE
Crankcase Fasteners, Outer:
16 ft-lbs (22 N·m)
ENGINE / COOLING SYSTEM