Polaris RZR Pro R 2022

6
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
6.25
5. Torque the three fasteners
a
to specification.
TORQUE
Helix Fasteners:
63 ft-lbs (85 Nm)
6. Once back together, verify the alignment marks made
during disassembly are properly aligned.
7. Install the stationary and movable sheave on the
vehicle. See Driven Clutch Installation.
DRIVEN CLUTCH INSTALLATION
1. Install driven clutch, bolt
r
, spacer
t
, and washer
y
. Torque fastener to specification.
TORQUE
Driven Clutch Retaining Bolt:
55 ft-lbs (75 Nm)
2. Install the drive belt.
3. Install outer clutch cover. Install five fasteners
e
and
engage 1/4 turn latches to secure the cover. Torque
fasteners to specification.
TORQUE
Outer PVT Cover Fasteners:
60 in-lbs (7 Nm)
PVT SYSTEM