3
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
3.97
6. Install the ignition coil fasteners
r
. Torque to
specification
TORQUE
Ignition Coil Retaining Fasteners:
80 in-lbs (9 N·m)
7. Connect the spark plug wire connectors
e
to the
ignition coils.
8. Connect the breather hose by securing clip
q
to the
valve cover fitting. Connect the coolant vent line fitting
w
.
NOTICE
Listen for an audible click when connecting the coolant
line fitting and gently pull on the connector to make sure
the line is fully connected.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
