EasyManua.ls Logo

Polhemus VIPER 4 - Page 5

Polhemus VIPER 4
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER MANUAL
Rev. A 5 May 2020
SAFETY NOTICES
This apparatus has been designed and tested in accordance with EN60601-1, 3
rd
edition.
Before powering up the instrument, be aware that the main plug shall only be inserted in a socket outlet
provided with a protective ground contact. You must not negate the protective action by using an extension
cord (power cable) without a protective conductor (grounding). Grounding one conductor of a two-
conductor outlet is not sufficient protection.
The VIPER™ sensors and sensor ports use standard USB-C style connectors. These ports are NOT a USB
connection. Only plug a VIPER sensor/stylus into these sensor ports.
When connecting a host device to the VIPER™ USB or RS-422 output port, ensure that the host device is
compliant to the relevant safety standard for that device (EN60950/EN61010).
Only connect a Polhemus magnetic source into the source ports.
Do not operate the instrument in the presence of flammable gases or fumes. Operation of any electrical
instrument in such an environment constitutes a definite safety hazard.
Only use the sync port with a Polhemus provided sync cable and in accordance with the instructions in this
manual.
Do not connect two magnetic sources of the same frequency. The SEU will cease operation.
Be sure to read and understand the concept of Hemisphere of Operation in this manual and operate the
product using the correct Hemisphere of Operation setting.
Be sure to read and understand the setup and operation of this product to ensure accurate measurements.
Read the Precautions section of this manual.
WARNINGS
This instrument contains no user serviceable parts. Do not attempt to service the unit. Return it to Polhemus
for repair.
Do not perform any unauthorized modification to the instrument.
Do not use the instrument in a manner not specified by the manufacturer.
Only use the DC power supply provided by Polhemus: part number 1C0614.
Ensure the VIPER™ power supply or power cord to the power supply is accessible so mains power can be
removed quickly.
CONTRAINDICATIONS
There are no contraindications with the VIPER™ system as provided by Polhemus. The final medical product that
the VIPER™ system is incorporated into needs to be evaluated for contraindications.

Table of Contents