Parameter Reference
81
X_CustomKeepAliveMsg Defines the custom message to be used when
X_KeepAliveMsgType is custom. The value has the
following format:
mtd=NOTIFY;event=<whatever>;user=<anyone>
Where
• NOTIFY can be replaced by any other SIP method, such
as PING
• event is optional and is only applicable if method is
NOTIFY. If event isn’t specified, the 'keep-alive' event is
used with NOTIFY
• user is optional. If not speciifed, the request-uri won’t
have a user ID, and the TO header field uses the same
user ID as the FROM header, which is the local account
user ID. If user is specified, it’s used as the user ID in the
Request-URI and TO header.
SIP messages for keep-alive are sent only once without
retransmission. Responses to the SIP messages are
ignored by the handset.
None
X_UserAgentPort UDP port where the handset sends and listens for SIP
messages.
5060 (n=1)
5061 (n=2)
5062 (n=3)
5063 (n=4)
5064 (n=5)
5065 (n=6)
5066 (n=7)
5067 (n=8)
X_UserAgentPorts A comma-separated list of as many as 10 alternative user
agent ports to use when there is no response received from
the SIP Registrar.
None
DirectoryNumber Directory number associated with this service. None
X_DefaultRing Call waiting tone (as specified in the Ring Profiles) to play
when there is a second incoming call.
1
X_AcceptResync Control whether to accept a SIP NOTIFY request with
event=resync to trigger a reboot of the handset so it can
download new firmware or configuration upon boot up.
Choice of:
• no (don’t accept resync trigger)
• yes with authentication (accept after challenging
the sender)
• yes without authentication
(accept without
challenging the sender)
yes without
authenticati
on
SPn Service — Debug Options (VoiceService.1.VoiceProfile.1.Line.n.), n = 1 - 8
SPn Services (n = 1, 2, 3, 4, 5, 6, 7, 8) Settings
Parameter Description Default Setting
To Next Page
Loading...
