IP Network Services
Polycom, Inc. 496
6 Click the DNS tab.
7 Modify the following fields:
Default Management Network Service – DNS
Field Description
MCU Host Name Enter the name of the MCU on the network.
Default name is RMX
DNS Select:
•Off – If DNS servers are not used in the network.
•Specify –To enter the IP addresses of the DNS servers.
Note: The IP address fields are enabled only if Specify is selected.
Register Host Names
Automatically to DNS
Servers
Select this option to automatically register the MCU Signaling Host and Shelf
Management with the DNS server.
Local Domain Name Enter the name of the domain where the MCU is installed.
DNS Servers Addresses
Primary Server The static IP addresses of the DNS servers.
A maximum of three servers can be defined.
Secondary Server
Tertiary Server
To Next Page
Loading...
