IP Network Services
Polycom, Inc. 497
8 Click the Security tab.
9 Modify the following fields:
Management Network Properties – Security Parameters
Field Description
Secured
Communication
Select to enable Secured Communication.
The Collaboration Server supports TLS 1.0 and SSL 3.0 (Secure Socket Layer).
A SSL/TLS Certificate must installed on the Collaboration Server for this feature to
be enabled. This box is checked by default when the MCU is in Ultra Secure Mode.
For more information see Appendix F - Secure Communication Mode.
Skip certificate
validation for user
logging session
Select this check box to prevent peer certificate requests being issued.
For more information see (PKI) Public Key Infrastructure.
This check box must be cleared when enabling Secured Mode. If it is not cleared
an Active Alarm is created and a message is displayed stating that Secured
Communications Mode must be enabled.
Revocation Method
To Next Page
Loading...
