System Configuration Flags
Polycom®, Inc. 763
BONDING_NUM_CHANNELS_IN_
GROUP
(ISDN)
The number of channels in the bonding group to be connected
before dialing the next sequential channel.
Default: 50
BURN_BIOS Although not recommended, setting this flag’s value to NO will
prevent BIOS upgrade.
Default: YES.
CAC_ENABLE When set to YES, enables the Call Admission Control
implementation in the Collaboration Server.
Default: NO (CAC is disabled)
CASCADE_LINK_PLAY_TONE_ON
_CONNECTION
When set to YES, the RealPresence Collaboration Server plays a
tone when a cascading link between conferences is established.
The tone is played in both conferences.
This tone is not played when the cascading link disconnects from
the conferences.
The tone used to notify that the cascading link connection has
been established cannot be customized.
Default value: NO.
The tone volume is controlled by the same flag as the IVR
messages and tones: IVR_MESSAGE_VOLUME.
CELL_IND_LOCATION Change the location of the display of Network Quality Indicators
displayed in the cells of the conference Video Layout.
Default: TOP_RIGHT
Range:
• BOTTOM_LEFT
• BOTTOM_RIGHT
• TOP_LEFT
• TOP_RIGHT
CFG_KEY_ENABLE_FLOW_CONT
ROL_REINVITE
Used to enable or disable sending a re-INVITE to endpoints to
adjust their data rate. When set to YES, re-INVITE is used for
endpoints that do not support flow control in SIP using either the
Information or RTCP Feedback mechanisms.
Default: NO.
CHANGE_AD_HOC_CONF_DURAT
ION
The duration of an ad-hoc conference* can be configured on a
system level by setting the flag to one of the following values (in
minutes): 60 (default), 90, 180 and 270.
* An ad-hoc conference is automatically created when the
participant dials into an Ad-hoc Entry Queue and enters a
conference ID that is not being used by any other conferencing
entity. It is based on the Conference Profile assigned to the EQ.
The MCMS System Flags
Flag Description Add?
To Next Page
Loading...
