System Configuration Flags
Polycom®, Inc. 781
MANAGE_TELEPRESENCE_ROO
M_SWITCH_LAYOUTS
Determines whether the MLA or the RMX controls the Room
Switch Telepresence Layouts.
• When set to NO, the RMX does not manage Telepresence
Room Switch Layouts and they continue to be managed by the
MLA.
• When set to YES, the RMX manages Telepresence Room
Switch Layouts.
Default: NO
Range: YES / NO
Note: System re-start is not required for this flag’s settings to take
effect.
For more information see Room Switch Telepresence Layouts.
MAX_ALLOWED_RTV_HD_FRAME
_RATE
Defines the threshold Frame Rate (fps) in which RTV Video
Protocol initiates HD resolutions.
Flag values are as follows:
Range: 0-30 (fps)
Default: 0 (fps) - Implements any Frame Rate based on Lync RTV
Client capabilities
MAX_CONF_PASSWORD_REPEAT
ED_DIGITS
Allows the administrator to configure the maximum number of
consecutive repeating characters that are to be allowed in a
conference password.
Range: 1 - 4
Default: 2
MAX_CP_RESOLUTION The MAX_CP_RESOLUTION flag value is applied to the system
during First Time Power-on and after a system upgrade. The
default value is HD1080.
All subsequent changes to the Maximum CP Resolution of the
system are made using the Resolution Configuration dialog box.
Possible flag values:
• HD1080 – High Definition at 60 fps
• HD1080 - High Definition at 30 fps
• HD720 – High Definition at 60 fps
•HD – High Definition at 30 fps
•SD30 – Standard Definition at 30 fps
•SD15 – Standard Definition at 15 fps
•CIF – CIF resolution
Default: HD1080
For more information see Video Resolutions in AVC CP
Conferencing.
The MCMS System Flags
Flag Description Add?
To Next Page
Loading...
