EasyManua.ls Logo

Polycom realpresence 1800 - Page 813

Polycom realpresence 1800
1113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Configuration Flags
Polycom®, Inc. 782
MAX_INTRA_REQUESTS_PER_IN
TERVAL
Enter the maximum number of refresh (intra) requests for the
Content channel sent by the participant’s endpoint in a 10 seconds
interval that will be dealt by the Collaboration Server system.
When this number is exceeded, the Content sent by this
participant will be identified as noisy and his/her requests to
refresh the Content display will be suspended.
Default setting: 3
MAX_INTRA_SUPPRESSION_DUR
ATION_IN_SECONDS
Enter the duration in seconds to ignore the participant’s requests
to refresh the Content display.
Default setting: 10
MAX_MS_SVC_RESOLUTION Used to minimizing the resource usage by overriding the default
resolution selection and limiting it to a lower resolution.
Range: AUTO, CIF, VGA, HD720, HD1080
Default: AUTO
The MAX_MS_SVC_RESOLUTION System Flag operates
independently from the MAX_RTV_RESOLUTION System Flag
allowing differing maximum resolutions to be selected for the MS
SVC and RTV protocols.
MAX_NUMBER_OF_MANAGEMEN
T_SESSIONS_PER_SYSTEM
Defines the maximum number of concurrent management
sessions (http and https connections) per system.
Value: 4 - 80
Default: 80
MAX_NUMBER_OF_MANAGEMEN
T_SESSIONS_PER_USER
Defines the maximum number of concurrent management
sessions (http and https connections) per user.
Value: 4 - 80
Default: 10 (20 in Ultra Secure Mode)
MAX_PASSWORD_REPEAPED_C
HAR
Allows the administrator to configure the maximum number of
consecutive repeating characters to be allowed in a user
password.
Range: 1 - 4
Default: 2
MAX_PASSWORD_REPEATED_CH
AR
Allows the administrator to configure the maximum number of
consecutive repeating characters to be allowed in a password.
Range: 1 - 4
Default: 2
MAX_RTV_RESOLUTION Enables you to override the Collaboration Server resolution
selection and limit it to a lower resolution, hence minimizing the
resource usage to 1 or 1.5 video resources per call instead of 3
resources. Possible flag values are:
AUTO (default), QCIF, CIF, VGA or HD720.
The MCMS System Flags
Flag Description Add?

Table of Contents

Other manuals for Polycom realpresence 1800

Related product manuals