EasyManua.ls Logo

Polycom realpresence 1800 - Page 818

Polycom realpresence 1800
1113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Configuration Flags
Polycom®, Inc. 787
NUMERIC_CHAIR_PASS_MIN_LE
N
Defines the minimum length required for the Chairperson
password.
Value: 0-16
Default: 0 - This rule is not enforced.
NUMERIC_CONF_ID_LEN Defines the number of digits in the Conference ID that will be
assigned by the MCU. Enter 0 to disable the automatic
assignment of IDs by the MCU and let the Collaboration Server
user manually assign them.
Range: 2-16 (Default: 4).
NUMERIC_CONF_ID_MAX_LEN The maximum number of digits that the user can enter when
manually assigning an ID to a conference.
Range: 2-16 (Default: 8)
Note: Selecting 2 limits the number of simultaneous ongoing
conferences to 99.
NUMERIC_CONF_ID_MIN_LEN The minimum number of digits that the user must enter when
manually assigning an ID to a conference.
Range: 2-16 (Default: 4)
Note: Selecting 2 limits the number of simultaneous ongoing
conferences to 99.
NUMERIC_CONF_PASS_DEFAULT
_LEN
This flag enables or disables the automatic generation of
conference passwords and determines the number of digits in the
conference passwords assigned by the MCU.
Possible values are:
•0 disables the automatic password generation in both Standard
Security Mode or Ultra Secure Mode.
Any value other than 0 enables the automatic generation of
conference passwords if the flag
HIDE_CONFERENCE_PASSWORD is set to NO.
1 – 16, default: 6 (Standard Security Mode)
9 – 16, default: 9 (Ultra Secure Mode).
If the default is used, in non-secured mode the system will
automatically generate conference passwords that contain 6
characters.
NUMERIC_CONF_PASS_MAX_LE
N
The maximum number of digits that the user can enter when
manually assigning a password to the conference.
Range:
0 – 16 (Standard Security Mode)
9 – 16 (Ultra Secure Mode).
Default (both Modes): 16
The MCMS System Flags
Flag Description Add?

Table of Contents

Other manuals for Polycom realpresence 1800

Related product manuals