12
Specifications
Inputs / Outputs
Alarms
Number 8
Functions 6 threshold alarms / lack of sample / active channel
1 system alarm
1 warning alarms
Cut-off power 30 VDC, 0.5 A maximum
Logical inputs
Number 12
Remote alarm clearance
By-pass measurement for a channel
Serial input interface RS 485, Modbus communication protocol
Outputs 4 / 20 mA
Number 8
4/20 mA or 0/20 mA programmable
Galvanically insulated
Maximum charge of 800 ohms
Materials and protection
Transmitter Aluminium with polyester paint
Panels and other boxes Polystyrene
Protection transmitter box IP 65
Protection cabinet (optional) IP 54
Cabinet front door Plexiglas
Maintenance
Calibration Chemical zero, slope with calibration solution
Maintenance
No particular maintenance is necessary
Cleaning can be done with a soft non-aggressive cloth
Reagent consumption Approximately 1L per month and per reagent
Calibration solution consumption Approximately 200 ml / calibration
Time safeguard lithium battery CR 1220 (3 V)
Transmitter
Display
Programming by menu
Concentration of 6 samples
Analyzer status
Alarms
Trend curves
Concentration historic
Calibration parameters historic (date, slope and offset)
Mains power supply
Mains
100 - 240 VAC 50 - 60 Hz
Automatic switching
Max. consumption: 80 VA
To Next Page
Loading...