71
Section 11 Spare Parts
Accessories
09125=A=1485 Kit for Profibus DP with board for 91xx / 92xx and Operator Manual
09125=A=2485 Optional RS485 JBUS/MODBUS for transmitters model 91XX after February 2004 (CPU-ph2) or 92XX
after June 2006 (CPU-ph2): board + instruction manual (5 languages)
09210=A=8000 2 years spare part kit 921X (all ranges). Includes items and quantities below
8 x 589=010=015 Fitting for 1.5mm I.D tubing - 10/32 UNF thread
8 x 590=050=060 Polyethylene tubing 1.6 x 3.2mm (per meter)
8 x 625=065=025 Printed stickers for tubing identification
1 x 09210=A=8050 Kit of (8) ferrules, (8) nuts
8 x 09210=A=4362 Injectors
2 x 226=003=013 Teflon coated magnetic stirrer (for 921X analyzers)
0.5 x 151400,22387 PE tubing 6 x 8mm (per meter)
1.0 x 151575,00006 PE tubing 4 x 6mm (per meter)
09210=A=8012 9210-ph2 Analyzer tech spare part kit. Includes items and quantities below:
1 x 09210=A=0250 Sample level sensor for 921X
1 x 09210=C=7010 9210 set of dry chemicals for 50 days operation
1 x 09210=A=8072 Kit of 5 empty canisters w/caps & stickers for 9210-ph2 silica
1 x 689=118=008 Sampling solenoid valve, NPS 0.8 (0.2 - 6 bars)
1 x 689=118=024 Sampling electrovalve (overflow vessel)
1 x 695=004=004 Calibration / flush pump
1 x 09210=A=8040 micro-dosing diaphragm self-priming pump
09210=A=8072 Kit of 5 canisters w/caps & stickers for 9210-ph2 silica (for dry chemicals see 09210=C=7010)
09210=C=7010 9210 set of dry chemicals for 50 days operation (applicable for all 9210 generation)
G-MC-9210 GOLD-Contract, Maintenance & Calibration, Analyzer Silica (SiO
2
), 9210
P-MC-9210 PLATINUM-Contract, Maintenance & Calibration, Analyzer Silica (SiO
2
), 9210
S-MC-9210 SILVER-Contract, Maintenance & Calibration, Analyzer Silica (SiO
2
), 9210
MC-9210 Maintenance & Calibration, Silica (SiO
2
) analyzer, 9095/9097/9210
Spare parts in contact with sample
09210=A=0100 0.5 - 6 bars adaptation kit for 6 solenoid sample valves
09210=A=0105 Sampling flow-rate adjustment screw (w/ its O-ring)
09210=A=0110 Metric to imperial conversion assembly (for one channel) from connector 6 mm O.D. to 1/4'' O.D. acetal
09210=A=0111 921X sample valve kit (uneven to even number)
09210=A=0121 Complete 1 channel block for 921X
09210=A=0122 Complete 2 channels block for 921X
09210=A=0143 Complete 3 channels block for 921X
09210=A=0144 Complete 4 channels block for 921X
09210=A=0165 Complete 5 channels block for 921X
09210=A=0166 Complete 6 channels block for 921X
09210=A=0250 Sample level sensor for 921X
356099,05040 Viton O-ring 4 x 1 mm of the sampling flow-rate adjustment screw.
356099,35380 Viton O-ring 38 x 2 mm (around level detector)
359110,52012 Tubing silicone 12 x 17 mm (per meter) - from 8810 vessel or 921x, 924x column to drain -
689=118=008 Solenoid valve (24CC, 2/2way) as per 9210&9211 sample blocks [NPS 0.8 (0.2 - 6 bars)]. Delivered with
one connector P/N 350=005=377. For mounting, see special torx screw driver at P/N 820=000=006
689=118=016 Solenoid valve (24CC, 2/2way, NPS 1.6 (0.2 - 2 bars)). Delivered with one connector P/N 350=005=377.
For mounting, see special torx screw driver at P/N 820=000=006
689=118=024 Solenoid valve (24CC, 2/2way) as per 9210&9211 overflow vessel (AKA transfer valve). For connector,
see P/N 350=005=377. For mounting, see special torx screw driver at P/N 820=000=006
Spare parts in contact with cell or electrodes
09097=C=0560 Heating element
09210=A=0300 Complete photometer cell for 921X
09210=A=0400 Complete mixer for 921X analyzers
09210=A=0500 Hollow fiber for 921X
To Next Page
Loading...