Polymetron 9210 - Section 12 Default Configuration

73
Section 12 Default Configuration
User configuration
Parameter Default value Possible values Selected values Date
CALIBRATION / PROGRAMMING
Offset interval 24 hours 1 - 999 hours
Cal. sol 214 ppb ppb / ppm
Auto. cal No Yes / No
Base Day Day / Hour
Week SMTWTFS SMTWTFS
Hour 15:00:00 24 Hour clock
MAINTENANCE / REAGENTS REFILL / ADJUST VOLUMES
Reagent 1 2.00 L 0 - 5 L
Reagent 2 2.00 L 0 - 5 L
Reagent 3 2.00 L 0 - 5 L
Calibration solution 2.00 L 0 - 5 L
MEASURE / MEASURING MODE
Cycle In loop Interval / In loop
Interval 15 mins 1 - 999 mins
ALARMS / ALARM 1
Mode Limit
Limit
Active channel
Level sample
Affect Channel 1 Channel 1-6
Limit 1000 ppb
Direction Up Up / Down
Hysteresis 0% 0 - 10%
Relay N.O. N.O. / N.C.
ALARMS / ALARM 2
Mode Limit
Limit
Active channel
Level sample
Affect Channel 2 Channel 1-6
Limit 1000 ppb
Direction Up Up / Down
Hysteresis 0% 0 - 10%
Relay N.O. N.O. / N.C.
ALARMS / ALARM 3
Mode Limit
Limit
Active channel
Level sample
Affect Channel 3 Channel 1-6
Limit 1000 ppb
Direction Up Up / Down
Hysteresis 0% 0 - 10%
Relay N.O. N.O. / N.C.