EasyManua.ls Logo

Polymetron 9210 - Spare Parts

Polymetron 9210
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
72
Spare Parts
09210=C=0310 PVC square cover for 921X photometric cell
09210=C=0330 Spacer ring for 921X mirror
09210=C=0340 Mirror for 921X analyzers
226=003=013 Teflon coated magnetic stirrer (for 921X analyzers)
356099,05220 O-ring Viton 22 x 1 mm (around mirror)
356099,15040 Viton O-ring for use on 8873 temperature sensor, 8362 pH-probe and 921X hollow fiber
359000,40780 Pt100 temperature sensor
431=100=210 Colorimetric cell nut PG21 - Brass coated nickel
Spare parts in contact with reagents or standard solution
08891=A=0040 Cap for 9210 5L canister with hole for reagent tubing
09210=A=0600 Weight with filtration-grid for 921X reagent canisters
09210=A=7100 Set of 4 stickers 4 for 9210 canisters "Declaration of content". Stickers only.
09210=A=8040 Kit micro-dosing diaphragm pump, self priming, with tubing-connectors-screws ready for mounting on
9210-ph2
09210=A=8080 Tube guide including weight and filtration grid, for 2 liter canister of 9210, 9211, (for chemicals see
09210=C=7000, for canister-kit see 09210=A=8070, for reagent-tubing see 590=050=060)
09210=C=0005 Canister holder for 921x (for canister and stickers, see 0921x=A=8070)
09210=C=0630 Filtration-grid for weight of 8810 or 921X reagent canisters
09210=C=7000 9210 set of dry chemicals for 45 days operation
09210=C=7010 9210 set of dry chemicals for 50 days operation (applicable for all 9210 generation)
148644,05125 Fitting - nipple type - 10/32 UNF for 1/8" or 4 mm tubing
151065,08699 PTFE tubing Ø 0.8 x 1.6 mm (per meter)
151575,00006 Tubing in PE (low density), Ø 4 x 6 mm (per meter)
495=020=001 2 liter PE canister with plain cap
584=024=024 Union fitting PP for 4 mm tubing
589=010=015 Fitting for 1.7 mm I.D. tubing – 10/32’’ thread
589=011=040 Fitting for 4 mm I.D. tubing – 10/32’’ UNF thread in PP
590=050=060 Tubing in PE (low density), Ø 1.6 x 3.2 mm (per meter)
695=004=004 Pump 24 VDC, membrane, 0.1 L/mn, for 921x calibration/flush pump
Electronics spare parts
09200=A=1001 CPU board with display for Monec E9200
09200=A=1010 CPU board with display for Monec E9200, loaded with 9210 latest software
09200=A=2000 Power supply board for Monec E9200
09200=A=5000 User connections / Interface board for 9210 & 9211
09200=A=5500 921X Internal bus communication module
09210=A=1234 Connection board for 921X mixer/heater
09210=A=1500 Colorimetric measurement module for (0-1K_SiO
2
/ 0-5_PO
4
) applications.
09210=A=1510 Colorimetric measurement module for (0-5K_SiO
2
) applications.
09210=A=1520 Colorimetric measurement module for (0-50_PO
4
) application.
425=210=022 Cable gland PG21 PP grey equipped with anti-bend protection for diameter sizes 13 to 18 mm
Additional hardware
820=000=006 Elbow torx screw driver T6
Documentation
221=092=010 Operator manual in French for POLYMETRON 9210 Silica, A4 format
221=192=010 Operator manual in English for POLYMETRON 9210 Silica, A4 format
221=292=010 Operator manual in German for POLYMETRON 9210 Silica, A4 format
221=492=010 Operator manual in Italian for POLYMETRON 9210 Silica, A4 format
221=592=010 Operator manual in Spanish for POLYMETRON 9210 Silica, A4 format

Table of Contents