powersoft X8 - Thermal Limiter ON on Power Supply; AMP Fan Failure

34
X8 | SERVICE MANUAL
Thermal limiter ON on Power Supply
AMP Fan Failure
Resolved
Update the unit’s
Firware via Armonia
or through the USB
Pen Drive procedure
Faulty connector
- contact the
Powersoft’s Service
Team
Replace the Fans
Replace the AMP Fan
Contact the
Powersoft
Service Team
Contact the
Powersoft
Service Team
Check the PWS and AMP
Fans’ viability
Check the AMP Fan’s
viability
Install the .pam default
parameters and restart the
unit
Unplug and plug the AMP
Fan’s connector and switch
the unit on
OK
OK
OK
OK
FAIL
FAIL
FAIL
FAIL
INDEX