powersoft X8 - Equalizers

INDEX
41
X8 | SERVICE MANUAL
The intuitive layout of the routing matrix is very similar to the one
that is found in Armonía.
Routing a signal is achieved by tapping on the desired routing
option.
It is also possible to clear the matrix and restore the default setting
by tapping the bottom right buttons.
Navigate through the output channels by tapping on the channel
selection bar.
Access to the routing matrix’s output section gain structure is
achieved by tapping on the Channel button.
Set the gain by dragging or tapping the virtual fader.
Fine tuning is achieved by tapping on the “+” or “-” buttons.
Access the equalizer section by tapping on the EQ button.
Toggle between 3 EQ layers by sliding left to right or vice-versa.
Navigate to the Filter’s window by tapping the Filter Button
Add up to 32 lters by tapping on the “+” on the top left corner of
the Filters window.
Once the lter has been enabled, choose the desired type.
Access the Edit window by tapping Edit.
EQUALIZERS