powersoft X8 - Possible Causes; Pulsing YELLOW Centre LED; Pulsing YELLOW;RED Centre and Ring Leds; Pulsing RED Centre LED + Channel Status Ring LED

7
X8 | SERVICE MANUAL
INDEX
Pulsing YELLOW Centre LED: CH Thermal Protection ON (70°)
13
Pulsing YELLOW/RED Centre and Ring LEDs: CH Thermal Protection ON (85°)
14
Pulsing RED Centre LED + Channel status Ring LED: Channel protection Enabled
15
Possible Causes:
• Out of range Rail Voltage
• AD converter in fault
• Out of range Aux Voltage
• DA converter in fault
• Short circuit protection ON
• Out of range Aux Current
• AES3 reception in faulty