Powerware Plus 80 - Safety Considerations

I
I
I*
I
I
I
I
I
I
IO
I
I
I
I
I
I
I
I0
I
I
Safety Considerations
The UPS enclosures are designed for industrial or computer room applications. and
contain safety shields behind the doors. However, the UPS is a sophisticated power
system and should be handled with appropriate care, following these guidelines:
l Keep surroundings clean and tree horn excess moisture.
l Do not operate the UPS close to gas or elect& heat sources.
l The system is not intended for outdoor use.
l The UPS operating environment should be maintained within the
parameters stated in this book.
l Keep the UPS doors closed to ensure proper cooling airflow and
to protect personnel from dangerous voltages inside the unlt.
l The UPS contains ita own power source. Lethal voltages are’
present even when the UPS Is disconnected from utility power.
WARNING:
: Only AUTHORIZED SERVICE PERSONNEL should parformeervlce or
maintenance on the UPS or battery.
If service or routine UPS maintenance is required:
l Be sure all power is dlaconnected before performing installation
or service.
l Be sure the area around the UPS system is clean and
uncluttered.
l Battey cabinet maintenance or battery replacement should be
pertormed only by authorized servtce personnel.
l Obaewe all DANGER, CAUTION, and WARNING notices Rxed to
the lnakfe and outside ot the equipment
l Alwsys conforin to the more detailed satety precautions
deacrtbed In ‘Important Safety Instructions” on page 37.
Powerware Plus 60 UPS Operator’s Manual
7