360 Repairs
31
2 Repairs
2.1 Before getting started
2.1.1 About overhauling a weighing cell
• In case of a broken flexure, all flexures must be replaced.
• Enough space and a sorted way of working are best conditions since it is essential to replace the
same parts, particularly screws, in the same place when re-assembling!
2.1.2 About these instructions
• Numbers in round brackets refer to components shown in the overall view of chapter "1.5.1
Overall view – Übersicht" on page 10. Have a printout of this overwiev always at disposal!
• Numbers in square brackets refer to tools shown in chapter "2.1.3.1. Tool kit 350-8537" on
page 32. Have a printout of this chapter always at disposal, too!
To Next Page
Loading...
