Precisa 360 - Cleaning; Cleaning the Magnet Pot; Cleaning the Coil; Checking the Cleanliness Again

360 Repairs
39
2.6 Cleaning
2.6.1 Cleaning the magnet pot
1. Wrap a double-sided adhesive tape around a flat stick.
2. Dab with the stick on the ground of the pot.
3. Prepare a thin and round stick the same way and spin it through the gap between the pot‘s wall
and the magnet.
4. Dab over the top of the magnet pot with a piece of adhesive tape.
2.6.2 Cleaning the coil
1. Using a lint-free cloth, remove any contamination from the coil. Do not clean the coil with
adhesive tape!
2.6.3 Checking the cleanliness again
1. Inspect the annular gap and the coil for residual contamination and clean if necessary.