360 Repairs
33
2.1.3.2 Instruments
• Soldering iron
• Voltmeter
2.1.3.3 Standard tools:
• Box spanner Nos.4, 5.5 and 7
• Flat-bladed screwdriver Nos.1, 2 and 4
• Phillips screwdriver No.2
• Hexagon socket wrench SW 2.5mm
• Hexagon key 1.5mm
• Tweezers
• Magnifier
2.1.4 Prepairing the tools
• Screw the 2 long [2] and 2 short [3] support posts on the assembly plate as shown in the figure
of the tool kit.
• Preheat the soldering iron to 310 ± 5°C (590 ± 10°F).
2.1.5 Spare parts
• Have all required spare parts at disposal, the fitting flexures (3), (6) and (8) according to the
instructions in chapter "1.5.2 Flexure sets – Lagersets" on page 12.
To Next Page
Loading...
